Embertec Emberplug EPUSAV-ET-01 Instalační příručka stáhnout pdf (Strana 16)

Problem To Check

The Embertec Emberplug™

is not receiving power.

The Embertec Emberplug™ AV

is not powering down my

equipment in standby mode.

The SmartSensor ashes

frequently during normal

operation.

The protected light is on.•

Ensure the equipment is plugged into the 'Power •

Saver' socket, not into the ‘Always On’ socket.

The • Embertec Emberplug™ AV

has not

detected the equipment is in standby. Please

repeat this process by switching on the

Audio Visual (AV) component again, waiting

10 seconds, and switching o again making

sure all appliances are in standby mode.

This may be an indication of unwanted •

infrared activity in the area. Please check

the immediate area for infrared devices

that maybe interfering with the Embertec

Emberplug™ AV, such as compact uorescent

lights, computers, mobile phones, and other

portable consumer electronic devices and:

Move the SmartSensor to another location that is •

within line of sight and normal operation range of

your Audio Visual (AV) equipment remote controls.

The LED on the main body of

the Embertec Emberplug™ AV

ashing, but my SmartSensor

LED does not work (when

plugged in and powered on).

Please check your SmartSensor connection to •

the Embertec Emberplug™ AV

by:

Ensuring the SmartSensor cable is safely •

and securely connected to the side of the

Embertec Emberplug™ AV, and;

Press the button on the top of the SmartSensor •

when plugged into the Embertec Emberplug™

with the Embertec Emberplug™ AV

switched

on. If the LED does not ash whenever you

press the button, it may be evidence of a faulty

SmartSensor or connection.

The Embertec Emberplug™ AV

has stopped working.

Unplug all the appliances connected into the •

Embertec Emberplug™ AV

adaptor and then

unplug from the wall socket. Then reconnect

everything again.

The TV keeps turning o

after 1 hour.

The SmartSensor default setting for Active •

Powerdown is 60 minutes.

Please see • “Changing SmartSensor setting

for Active Powerdown” to change Active

Powerdown to 1, 2 or 3 hours.

Troubleshooting Guide

1 2 ... 11 12 13 14 15 16 17 18 19 20

Komentáře k této Příručce

Žádné komentáře

Embertec Emberplug EPUSAV-ET-01 Instalační příručka Strana 16

Komentáře k této Příručce